Mechanical Presses
NC2 Series
2-POINT ECCENTRIC GAP (C FRAME) PRESSES
Press capacities range
from 1100 kN to 2500 kN
Description
AIDA NC2 gap frame mechanical presses (also known as C frame mechanical presses) are available from 110 through 250 tons capacity. A compact rigid frame design minimizes the deflection rating and the low overall clearance minimizes reverse tonnage. The six-point slide guide system provides a long useful life. The wet-type clutch and brake provide higher intermittent rates and long life – important factors for hand-fed and top-stop applications.
An AC Variable frequency drive allows for wider speed ranges. The Quill mounted flywheel results in a larger bearing surface. The front to back mounted forged steel crankshaft along with hardened and precision ground gears are well suited for high stress blanking applications. Micro-Inching provides die setting at very low speeds.
- Featuring a highly rigid frame and a counter-rotating gear design that can withstand eccentric loading.
- The high-precision machining of every single component minimises the total clearance and reduces breakthrough.
- High versatility for a wide array of applications. The NC2 presses can be upgraded to create forming systems that incorporate coil feeding lines and transfer units.
Main Specifications
Below the main specification of this press series.
To request the product catalog in pdf format click on the side.
| Model | NC2-1100 | NC2-1600 | NC2-2000 | NC2-2500 | ||||
|---|---|---|---|---|---|---|---|---|
| Variant | (1) | (2) | (1) | (2) | (1) | (2) | (1) | (2) |
| Capacity (kN) | 1100 | 1600 | 2000 | 2500 | ||||
| Stroke length (mm) | 110 | 180 | 130 | 200 | 150 | 250 | 170 | 280 |
| Strokes per minute (min-1) | 50÷100 | 35÷65 | 40÷85 | 30÷55 | 35÷70 | 25÷45 | 25÷55 | 20÷35 |
| Die height (mm) | 350 | 400 | 400 | 450 | 450 | 500 | 450 | 550 |
| Slide area (mm) (L/R x F/B) | 1360×520 | 1500×580 | 1850×650 | 2100×700 | ||||
| Bolster area (mm) (L/R x F/B) | 1880×520 | 1880×680 | 2040×600 | 2040×760 | 2420×680 | 2420×840 | 2700×760 | 2700×920 |
| Frame gap (mm) | 270×310 | 350×630 | 310×350 | 390×700 | 350×390 | 430×800 | 390×350 | 470×880 |
| Working height (mm) | 900 | 900 | 1000 | 1100 | ||||
