Servo Presses
DSF-N1 Series

AIDA DSF-N1 Series


Press capacities range
from 800 kN to 3000 kN

The AIDA DSF-N1 Direct Drive Unitized Frame Servo Press marries the successful mechanical design of the NS1 Series Mechanical Unitized Frame press with AIDA’s DSF Direct Drive Servo. This combines the rigidity of a unitized frame with the flexibility of the freely programmable servo motion.

  • High productivity by using a low-speed, high-torque AC servo motor designed specifically for press applications.
  • Direct-drive mechanism connects the motor shaft directly to the drive pinion and then to the main gear in order to achieve high-precision and high valueadded forming.
  • Highly rigid frame, symmetrical front-to-back.
  • No maintenance space is required on either side of the press, enabling a line with a smaller footprint.
Main Specifications

Below the main specification of this press series.

To request the product catalog in pdf format click on the side.

Model DSF-N1-800 DSF-N1-1100 DSF-N1-1500 DSF-N1-2000 DSF-N1-3000
Capacity (kN) 800 1100 1500 2000 3000
Stroke length (mm) Fwd./ Rev. Motion 60/100/130 70/110/150 80/120/160 110/160/200 120/180/240
Stroke length (mm) Full stroke 160 180 200 250 300
Strokes per minute (min-1) Fwd./ Rev. Motion 118/96/82 114/93/76 100/82/68 81/67/57 62/51/42
Strokes per minute (min-1) Full stroke 1÷80 1÷70 1÷60 1÷50 1÷35
Die height (mm) 320 350 400 450 570
Slide area (mm) (L/R x F/B) 700×460 800×520 900×580 1000×650 1300×900
Bolster area (mm) (L/R – F/B) 900×600 1000×680 1100×760 1130×840 1500×1000
Frame gap (mm) 400×300(250) 500×320(270) 670×380(330) 800×420(370) 1000×600(550)
Working height (mm) 900 900 900 1000 1120

Related Products


DSF-N2 Series

2-point straight side presses
frontal crankshafts


NS1 Series

1-point straight side presses
frontal crankshafts


DSF-C1 Series

1-point gap frame presses
frontal crankshaft