Mechanical Presses
PMX-L4 Series

AIDA PMX-S4 Series - AIDA PMX-L4 Series


Press capacities range
from 2000 kN to 12000 kN

The PMX-L4 Series is composed by high-precision, high-rigidity, straight side 4-point presses for progressive die applications. The highly rigid tie-rod frame coupled with bearings designed with minimal overall bearing clearances keep breakthrough to a minimum, which reduces noise, enables high long-term accuracy and extends die life. The link motion, center drive limits torsional wind up of the massive eccentric shafts and provides more time in the forming zone to maximize material flow and improve part quality. Adding the link motion to the extremely accurate, low deflection, press structure along with the wide spaced connections and long slide guides provides an unsurpassed environment for precision progressive dies, reducing in this way vibration and noise and increasing overall speeds to guarantee high productivity.

  • Manufactured with forged eccentric shafts on a very low deflection tie rod frame with dynamic balancing of slide and upper die
  • Link-motion improves productivity and assures stable high-precision forming
  • The wide spacing between the points enables the PMX-L4 presses to effectively withstand off-center loads
  • The highly rigid frame can withstand the progressive stamping of thick sheet metal
  • The symmetrical front-to-back and left-to-right frame maintains high dynamic accuracy
Main Specifications

Below the main specification of this press series.

To request the product catalog in pdf format click on the side.

Model PMX-L4-2000 PMX-L4-3000 PMX-L4-4000 PMX-L4-5000 PMX-L4-6000
Variant 1 2 1 2 3 1 2 1 2 1
Capacity (kN)* 2000 3000 4000 5000 6000
Stroke length (mm) 200 200 200 300 250 250
Strokes per minute (min-1) 50÷120 40÷100 30÷80 30÷60 30÷70 30÷70
Die height (mm) 475 550 650 700 700 750
Slide area (mm) (L/R x F/B) 1550×830 1850×880 1850×880 2150×1000 2450×1200 2150×1150 2450×1150 2150×1150 2450×1150 2450×1250
Bolster area (mm) (L/R x F/B) 1550×950 1850×950 1850×1000 2150×1000 2450×1200 2150×1250 2450×1250 2150×1250 2450×1250 2450×1400
Max. upper die weight (kg) 1000 1000 1500 3000 3000 3000
Side opening (mm) 850×375 900×450 1020×450 1220×450 1170×450 1170×550 1270×650

*available up to 16000 kN – contact us for more information

Related Products


DSF-P4 Series

4-point straight side presses
transversal crankshafts


PMX-S4 Series

4-point straight side presses
transversal crankshafts


PMX-L2 Series

2-point straight side presses