Mechanical Presses
NS1 Series
1-POINT ECCENTRIC STRAIGHT SIDE PRESSES
Press capacities range
from 800 kN to 2000 kN
Descrizione
AIDA NS1 unitized frame mechanical presses are available from 80 through 200 tons capacity. The six-point slide guide system provides a long useful life. The wet-type clutch and brake provide higher intermittent rates and long life – important factors for hand-fed and top-stop applications.
An AC Variable frequency drive allows for wider speed ranges. The Quill mounted flywheel results in a larger bearing surface. The front to back mounted forged steel crankshaft along with hardened and precision ground gears are well suited for high stress blanking applications. Micro-Inching provides die setting at very low speeds
- High-precision and high value-added forming.
- Monobloc straightside construction eliminates frame deflection.
- Forced circulation lubrication system.
- Centrally located full-length slide guiding.
Specifiche principali
Di seguito le specifiche principali di questa serie di presse.
Per richiedere il pdf di questo prodotto è sufficiente compilare il form a lato.
| Model | NS1-800 | NS1-1100 | NS1-1500 | NS1-2000 | ||||
|---|---|---|---|---|---|---|---|---|
| Variant | (S) | (1) | (S) | (1) | (S) | (1) | (S) | (1) |
| Capacity (kN) | 800 | 1100 | 1500 | 2000 | ||||
| Stroke length (mm) | 60 | 100 | 70 | 110 | 80 | 130 | 95 | 160 |
| Strokes per minute (min-1) | 75÷150 | 55÷125 | 65÷135 | 50÷110 | 55÷115 | 40÷95 | 45÷95 | 35÷80 |
| Die height (mm) | 300 | 320 | 350 | 410 | ||||
| Slide area (mm) (L/R x F/B) | 700×460 | 800×520 | 900×580 | 1000×650 | ||||
| Bolster area (mm) (L/R x F/B) | 900×460 | 1000×520 | 1150×600 | 1250×680 | ||||
| Side opening (mm) | 440×270(220) | 500×290(240) | 560×330(280) | 620×380(330) | ||||
| Working height (mm) | 900 | 900 | 900 | 1000 | ||||
Prodotti Correlati
Serie DSF-N2
servo
presse a 2 punti di spinta e doppio montante
alberi motore frontali
Serie NS2
meccaniche
presse a 2 punti di spinta e doppio montante
alberi motore frontali
Serie DSF-N1
servo
presse a 1 punto di spinta e doppio montante
alberi motore frontali
