Servo Presses
DSF-P2 Series
2-POINT STRAIGHT SIDE PRESSES
Press capacities range
from 3000 kN to 27000 kN
Descrizione
The DSF-P2 Series is composed by high-precision, high-rigidity, straight side 2-point servo presses for progressive die applications. The highly rigid tie-rod frame coupled with bearings designed with minimal overall bearing clearances keep breakthrough to a minimum, which reduces noise, enables high long-term accuracy and extends die life. The left/right shaft configuration and the wide spacing between the connection points enables DSF-P2 presses to capably withstand off-center loads, and it utilizes a proprietary ‘torque unit’ design that doesn’t transmit reverse loads to the drive gears. The high precision of each component is achieved by machining the components in-house, and the total clearance is JIS Special Class or lower. The highly rigid frame and the symmetric design delivers high precision, high performance, and high durability. Moreover, the built-in dynamic counterbalances reduce vibration and enable stable high-speed production. In order to achieve high-precision assembled components, the minimal deformation that occurs once components are mounted in the press is replicated during the machining process.
- Manufactured with forged eccentric shafts on a very low deflection tie rod frame with dynamic balancing of slide and upper die
- Built-in dynamic counterbalances reduce vibration and enable stable high-speed production
- Minimizes breakthrough that occurs during blanking, increases die life, and also improves product precision
- The highly rigid frame can withstand the progressive stamping of thick sheet metal
- The symmetrical front-to-back and left-to-right frame maintains high dynamic accuracy
Specifiche principali
Di seguito le specifiche principali di questa serie di presse.
Per richiedere il pdf di questo prodotto è sufficiente compilare il form a lato.
| Model | DSF-P2-4000-245-115 | DSF-P2-6000-305-140 |
|---|---|---|
| Capacity (kN)* | 4000 | 6000 |
| Stroke length (mm) | 250 | 250 |
| Strokes per minute (min-1) | 1÷80 | 1÷118 |
| Slide adjustment (mm) | 100 | 150 |
| Die height (mm) | 700 | 800 |
| Slide area (L/R x F/B) (mm) | 2450×1150 | 3050×1400 |
| Bolster area (L/R x F/B) (mm) | 2450×1150 | 3050×1400 |
| Side opening (mm) | 1170 | 1250 |
* available up to 27000 kN on customised technical specification – contact us for more information
Prodotti Correlati
Serie DSF-PE2
servo
presse doppio montante a 2 punti di spinta
ingranaggi eccentrici frontali
Serie DSF-P4
servo
presse doppio montante a 4 punti di spinta
alberi trasversali
