Servo Presses
DSF-P2 Series

AIDA DSF-P2 Series

2-POINT STRAIGHT SIDE PRESSES

Press capacities range
from 3000 kN to 27000 kN
Descrição

The DSF-P2 Series is composed by high-precision, high-rigidity, straight side 2-point servo presses for progressive die applications. The highly rigid tie-rod frame coupled with bearings designed with minimal overall bearing clearances keep breakthrough to a minimum, which reduces noise, enables high long-term accuracy and extends die life. The left/right shaft configuration and the wide spacing between the connection points enables DSF-P2 presses to capably withstand off-center loads, and it utilizes a proprietary ‘torque unit’ design that doesn’t transmit reverse loads to the drive gears. The high precision of each component is achieved by machining the components in-house, and the total clearance is JIS Special Class or lower. The highly rigid frame and the symmetric design delivers high precision, high performance, and high durability. Moreover, the built-in dynamic counterbalances reduce vibration and enable stable high-speed production. In order to achieve high-precision assembled components, the minimal deformation that occurs once components are mounted in the press is replicated during the machining process.

  • Manufactured with forged eccentric shafts on a very low deflection tie rod frame with dynamic balancing of slide and upper die
  • Built-in dynamic counterbalances reduce vibration and enable stable high-speed production
  • Minimizes breakthrough that occurs during blanking, increases die life, and also improves product precision
  • The highly rigid frame can withstand the progressive stamping of thick sheet metal
  • The symmetrical front-to-back and left-to-right frame maintains high dynamic accuracy
Especificações principais

Abaixo a especificação principal desta série de prensa.

Para solicitar o catálogo de produtos em formato pdf clique na lateral.

Model DSF-P2-4000-245-115 DSF-P2-6000-305-140
Capacity (kN)* 4000 6000
Stroke length (mm) 250 250
Strokes per minute (min-1) 1÷80 1÷118
Slide adjustment (mm) 100 150
Die height (mm) 700 800
Slide area (L/R x F/B) (mm) 2450×1150 3050×1400
Bolster area (L/R x F/B) (mm) 2450×1150 3050×1400
Side opening (mm) 1170 1250

* available up to 27000 kN on customised technical specification – contact us for more information

Related Products

2021-05-17T09:37:46+02:00

DSF-PE2 Series

servo
2-point straight side presses
frontal eccentric gears

2021-05-17T09:38:46+02:00

DSF-P4 Series

servo
4-point straight side presses
transversal crankshafts

2021-05-17T09:41:46+02:00

PMX-L2 Series

mechanical
2-point straight side presses
link-motion