FAQ

FAQ2020-04-29T15:55:02+02:00

FREQUENTLY ASKED QUESTIONS

How do I directly contact a specific person at AIDA Europe?2021-04-09T22:52:10+02:00

Contact us and your information will be forwarded to the appropriate person:

While we don’t list direct contacts on our website, please use our general contact information and your request will be forwarded on to the appropriate person.

Where can I find information about Manzoni and Rovetta?2021-04-09T22:52:31+02:00

AIDA acquired Manzoni and Rovetta in 2004.

For more information regarding Manzoni and Rovetta, please:

Where can I find information about employment at AIDA Europe?2021-04-09T22:51:45+02:00
Where are AIDA presses manufactured?2020-07-15T17:44:50+02:00

In 7 dedicated manufacturing facilities, all over the world AIDA has the largest network of stamping press manufacturing facilities of any press builder. With production facilities in the USA (Dayton, OH), Japan, Italy, Malaysia, and China, AIDA maintains over 2 million sq. ft. of production floor space globally. AIDA DSF Servo presses are manufactured in all of our facilities. AIDA-America is the only press manufacturing facility in North America with the capability to manufacture servo presses from 300 through 3,500 tons.

Where are servo presses being used?2020-07-15T17:44:34+02:00

Across all industries using metal stamping AIDA DSF Series Servo Presses are used everywhere in the Automotive Industry, from OEM servo tandem lines, through all levels of the supply chain including Tier 1, 2 and 3, as well as contract and job shops. AIDA servo presses operate in many other industries beyond automotive, such as, Appliance (OEM and suppliers), Contract Manufacturers, HVAC, Consumer Goods, Electronics, Aerospace, and Medical.

Where are AIDA servo motors made?2020-07-15T17:44:11+02:00

AIDA designs and builds all of our own servo motors.

Since 2002 AIDA has designed and built every servo motor used on our DSF Series servo presses. The motor laminations are stamped on AIDA presses and the motors are assembled in our own factories.

What sizes and capacities are AIDA DSF Series servo presses available in?2020-07-15T17:42:54+02:00

80 through 3,500 tons

AIDA offers the broadest range of servo press tonnages and models. AIDA servo presses are available as single point gap frame presses all the way up to the industry’s highest output automotive servo tandem lines and most everything in between. AIDA has also installed the world’s largest servo transfer press, a 3,500 ton, DSF-T4-35000, in Canada.

How many AIDA DSF Servo Presses are in operation?2020-07-15T17:42:34+02:00

Over 2,200

AIDA has installed over 2,200 servo presses globally and over 300 in North America – more than any other press manufacturer.

When were direct drive servo presses first manufactured?2020-07-15T17:42:20+02:00

2002

When AIDA launched its direct drive servo presses in 2002, it created an entirely new class of stamping press. This innovative and disruptive application of technology is one of the most significant changes to stamping press technology in nearly 100 years.

What are the benefits of a direct drive servo press?2020-07-15T17:41:53+02:00

Flexibility, Accuracy, Programmability.
An AIDA DSF Servo Press has the ability to increase production rates – running as a short stroke press in pendulum motion, increase part quality – through optimization of forming speeds and the introduction of multiple restrike motion profiles, and open up endless possibilities for production runs – due to the virtually infinite programmability of the DSF Series press control.

What is an AIDA DSF Series Servo Press?2020-07-15T17:40:43+02:00

The industry leading direct drive servo press AIDA was the first press builder to design and manufacture a direct-drive servo press, replacing the traditional flywheel clutch and brake with an AIDA designed and built, low RPM, high torque servo motor.

What type of oil does my press use?2021-04-09T22:53:36+02:00

Please refer to your press manual or contact AIDA Service Almost all of our maintenance manuals will provide quantity and viscosity grade (VG) for specific components located in the lubrication section. Our presses are not brand specific. We can assist you if you are unable to locate this information in your press manual, or you have lost your press manual.

Where can I find safety information for AIDA presses?2021-04-09T22:54:25+02:00

Please contact AIDA Service for safety related information

I need a manual for my press, who do I contact?2021-04-09T22:56:27+02:00

AIDA Service maintains manual libraries for modern and legacy models. Replacement manuals may be supplied. Please use the parts request form at the link below to request an equipment manual:

I need parts for my press, who do I contact?2021-04-09T22:59:14+02:00

AIDA Service maintains inventories of spare parts all across the globe. Please use the parts request form at the link below and your request will be properly routed to the correct AIDA location:

What is an AIDA DSF Series Servo Press?2020-07-15T17:22:54+02:00

The industry leading direct drive servo press AIDA was the first press builder to design and manufacture a direct-drive servo press, replacing the traditional flywheel clutch and brake with an AIDA designed and built, low RPM, high torque servo motor.

Go to Top