StampMax Presses
SME-L2 Series
TANDEM LINE LINK-MOTION PRESSES
Press capacities range
from 2000 kN to 6000 kN
Descrizione
The SME-L2 Series is composed by high-precision, high-rigidity, straight side 2-point presses suitable for tandem lines application. The welded straight side frame construction incorporates tie rods that, combined with the long slide guides, assures high long-term accuracy under loaded conditions and greatly enhance die life. The wet-type clutch and brake assures high-level intermittent operation capabilities and further enhances maintainability. The advanced link motion provides a reduced draw speed and constant slide velocity.
AIDA manufactures all the precision parts in-house in order to achieve minimal clearances in critical areas and delivers high-precision forming by means of the high-rigidity 8-surface slide guide design.
- Perfect for medium and large panel forming and deep draw applications
- Advanced link motion to provide reduced draw speed and constant slide velocity
- 8-surface slide guide design to ensure high-precision forming
- Overload protector utilizing an advanced metal seal design, offering fast response time for protecting your tooling and press
- Noise reduction and minimal breakthrough extend die life
- Eight-point square slide guide that limits lateral and longitudinal movement
- Suited for fully automatic tandem lines as well as for single-strike forming
Specifiche principali
Di seguito le specifiche principali di questa serie di presse.
Per richiedere il pdf di questo prodotto è sufficiente compilare il form a lato.
| Model | SME-L2-2000 | SME-L2-3000 | SME-L2-4000 | SME-L2-5000 | SME-L2-6000 | |||
|---|---|---|---|---|---|---|---|---|
| Capacity (kN) | 2000 | 3000 | 4000 | 5000 | 6000 | |||
| Rated tonnage point (mm) | 6.5 | 13 | 13 | 13 | 13 | |||
| Stroke length (mm) | 300 | 400 | 500 | 460 | 510 | 460 | 510 | 510 |
| Strokes per minute (min-1) | 20~40 | 15~30 | 15~30 | 15~30 | 15~20 | |||
| Slide adjustment (mm) | 200 | 200 | 200 | 200 | 300 | 200 | 300 | 300 |
| Die height (mm) | 600 | 700 | 800 | 800 | 900 | 800 | 900 | 900 |
| Slide area (mm) (L/R x F/B) | 2150×1200 | 2150×1250 | 2450×1250 | 2500×1250 | 2750×1250 | 2500×1400 | 2750×1400 | 2750×1500 |
| Bolster area (mm) (L/R x F/B) | 2150×1300 | 2150×1400 | 2450×1400 | 2500×1400 | 2750×1400 | 2500×1500 | 2750×1500 | 2750×1500 |
| Bolster height (mm) | 180 | 200 | 220 | 240 | 250 | |||
